Alarm Operation; Alarm Mode; Alarm Ringing - Hyundai H-1503U Instruction Manual

Radio with alarm
Hide thumbs Also See for H-1503U:
Table of Contents

Advertisement

Available languages

Available languages

SD/MMC card standards.
• FAT32 file system is supported by USB
and SD/MMC of this unit.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.

Alarm operation

Alarm mode

• In clock mode, press MODE button to
activate the alarm mode.
• In alarm mode press and hold SET button
to set the alarming time. Press repeatedly
SET button to go to setting of parameters in
following sequence: hours => minutes => exit.
When setting, the set digits of time will flash.
Press TURN+ or TURN- buttons to adjust the
time. if no button is pressed within 30 seconds
after a parameter is selected, the unit will
automatically set the alarm.
• If no button is pressed within 30 seconds in
alarm mode, the unit will exit to clock mode.

Alarm ringing

• When setting alarm, press RADIO button,
then the playing radio station will be set as the
alarm (the playing radio frequency is set as the
last played radio frequency),
Ringing will last 15 minutes.
• If the radio station was not set as an alarm
signal, then the unit will beep perionically.
• After setting the alarm, press MODE button
Instruction manual
to exit to clock mode.
• Press ALARM button and the alarm mode
will be on and an "ALARM" indicator will
appear on the screen.
• When the alarm goes off press any button
(except the SNOOZE button) to stop the alarm.
If SNOOZE button is pressed the "SNOOZE"
indicator will flash on the screen. Snooze time
is 5 minutes (snooze function can be used 2
times in a row).
Maintenance and care
If necessary, clean the unit with a piece of
cloth dampened with water only (be sure the
power cord is disconnected). The unit shall not
be exposed to dripping or splashing and no
objects filled with liquids, should be placed on
the unit. Normal ventilation of the unit shall not
be impeded for intended use.
Accessories
Receiver
AC/DC power adaptor
AG13 (1.5 V) battery
Audio cable 3.5-3.5 mm
Instruction manual
Warranty card
Consumer information
1 pc
1 pc
2 pcs
1 pc
1 pc
1 pc
1 pc
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents