Mains Operation; Alarm Function; Care And Maintenance - Hyundai PR 200 B/S Instruction Manual

4. MAINS OPERATION

Fit the AC power cord into the AC socket (14) at the back of the appliance and plug into
the household socket.
5. REAL TIME SETTING
Press the time set button (7) and hour set button (10), or minute set button (9), together,
until the correct clock time is displayed.

6. ALARM FUNCTION

6.1 Press the alarm set button (8) and simultaneously press the hour set button (10)
or minute set button (9) as appropriate until the required alarm time is reached.
6.2 To double check the alarm time, simply press the alarm set button (8) then the display
will show the pre-set alarm time.
6.3 Press the alarm on/off button (11) to activate the alarm (the alarm icon will display).
6.4 Turn the volume control –buzzer knob (12) fully downward until hear a "click" sound
to select the BUZZ function.
6.5
The alarm tone will switch on automatically at the pre-set alarm time.
6.6
To switch off the alarm simply press the alarm on/off button (11) once.
6.7
To activate the alarm again, press the alarm on/off button (11) until the alarm icon is
displayed.
7. USING THE RADIO
7.1
Turn the volume control – buzzer knob (12) upward to switch the radio on.
7.2
Set the waveband selector (6) to the required waveband.
7.3
Turn the tuning control knob (3) to select the frequency.
The current radio frequency will display.
7.4
Adjust the volume to the desired level by rotating the volume control – buzzer knob (12).
7.5
To turn off the radio, turn the volume control – buzzer knob (12) downward until a "click"
sound is heard.
Note
• The built-in AM and the external FM antennas are directional. If tuning into a FM station
extend or move the antenna (2) for a better reception. If tuning into a AM station rotate
the whole unit after tuning to obtain the best reception.
8. USING HEADPHONES (NOT INCLUDED)
A headphone jack has been provided so that the set can be used without disturbing others.
Plug in the 3.5mm headphones at the point marked
setting before adjusting the volume up to your chosen level. Excessive sound pressure from
earphones and headphones can cause hearing loss. The speakers will not operate when
headphones are fitted.

9. CARE AND MAINTENANCE

Wipe external surfaces with a soft cloth. If the casing is very dirty, unplug from the mains
supply and use a damp cloth soaked in a weak solution of washing up liquid and water.
Allow to dry thoroughly before reusing.
. Turn the listening volume to the lowest
ENG - 17
ENG