Thin Facing Installation - Travis Industries 564 SS Installation Manual

Thin Facing Installation (tile, marble, or other non-combustible under 25mm thick)
Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Do not install tile (or other material)
in front of the glass frame,
convection channel, or access panel
openings. This area must remain
open to access internal components
and for convection air.
TOP VIEW
Framing
Fireplace
Tile
NOTE FOR FPX FACES:
FPX arched faces require the FPX Face Upgrade
Kit (sku 98500683) and a triangular piece of
facing in these upper corners. See the
instructions included with the face for further
details.
42mm
1-5/8"
© Travis Industries
Installation
Facing is installed to this
edge of the fireplace.
Nailing Bracket
Drywall
190mm
7-1/2"
(for qualified installers only)
Raised Fireplaces:
Raised Fireplaces:
Facing is installed 25mm (maximum)
Facing is installed 1" (maximum)
above the base of the fireplace.
above the base of the fireplace.
FRONT VIEW
825mm
32-1/2"
4070620
Floor-Mounted Fireplaces or Raised Hearths: Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 25mm (max.) above the base of the
Build the hearth 1" (max.) above the base of the
fireplace. The fireplace may be raised to
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
accommodate thicker hearth materials.
38mm
1-1/2"
705mm
27-3/4"
25mm
1"
48mm 1-7/8"
100-01199_000
33