Travis Industries 564 SS Installation Manual page 53

Finalizing the Installation
3 Follow the directions below to replace the orifice.
Slide the air shutters all
a
the way to the right.
Remove and discard the front burner
b
gasket (used only for NG installations)
Front Burner
Orifice
Use a 1/2" open end wrench
Use a 13mm open end
c
wrench to unscrew the two
to unscrew the two orifices.
orifices.
e
Screw each LP orifice in so the
orifice protrudes 15/16"
24mm
(indicating full insertion).
© Travis Industries
(for qualified installers only)
1/2" Wrench
13mm
Rear
Burner
Orifice
15/16"
24mm
4070620
d
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
NG
Front
#56
Rear
#50
53
LP
#67
1.1
100-01199_000