Table of Contents
Advertisement
5.
After importing the target update file, select the Analyzers to be updated and tap on
"Update" button. A user will be asked to select the system type and a target firmware file
in the list as below. The updatable firmware is as below.
Analyzer firmware
l
Control firmware
l
Optic firmware.
l
6.
Tap on the "Next" button. The "Stop monitoring" screen will pop up asking a user to
confirm it.
7.
Tap on "Stop Monitoring" button and firmware update will be started. The firmware
update status will be shown using two green dots. The first green dot indicates that the
update file is transferred to Analyzer and the second green dot means that the firmware
updated successfully. If there is any communication error or any issue in updating the
firmware, the red dot will be shown instead.
8.
Tap on "Next" button when FW update is done with two green dots and it moves back to
Version Manager screen with updated version information.
Vertex Edge System
94
User Manual
Advertisement
Table of Contents
