Table of Contents
Advertisement
Start Program
Start Program
Upon power-up, the DAq automatically starts Linux and loads the Vertex Edge HMI program.
After the startup sequence, the Vertex Edge HMI main screen opens as below. The start-up
time may take several minutes, and the default user is Viewer.
NOTE
Any time the Vertex Edge System is powered up, loss of communications may cause
maintenance faults. See Section See "Acknowledge Notifications" on page 70 for more
information. for instructions to clear faults.
NOTE
Use the System Manager->Region and time menu to change the time and date on your
Vertex Edge System.
Vertex Edge System
49
User Manual
Advertisement
Table of Contents
