HOMCOM A90-196 Assembly & Instruction Manual page 14

Connect the right pedal to the right crank
arm. Both parts are marked R.
Connect the left pedal to the left crank arm.
Both parts are marked L.
The strap marked R goes on the right pedal.
The strap marked L goes on the left pedal.
With the R or L marking facing upward,
attach the end of the strap with 3 holes to
the inside of the pedal.
Hold the right pedal with one hand and
screw the pedal bolt onto the crank arm
with the other hand in a standard clockwise
motion. Finish tightening with the included
wrench.
Hold the left pedal with one hand and screw
the pedal bolt onto the crank arm with the
other hand in a non-standard
counterclockwise motion. Finish tightening
with the included wrench.
Attach the end of the strap with 4 holes to
the outside of the pedal. Adjust to your
preference.