System Control Unit Lite - AGFA XD 14 User Manual

24 | XD 14, XD⁺14 | Introduction to the DR Detector

System Control Unit Lite

The System Control Unit Lite is connected to the DR Detector via the DR
Detector cable.
The System Control Unit Lite is connected to the X-ray generator to
synchronize the exposure, in a configuration with X-ray generator
synchronization.
The System Control Unit Lite is connected to the workstation via wired
network.
Depending on the configuration, the System Control Unit Lite may not be part
of the system.
2
Power switch
1.
Status indicator
2.
• Green or orange: ready
Figure 7: System Control Unit Lite
Related Links
Safety directions for the power supply
System Control Unit Lite
Safety directions for the System Control Unit
0430A EN 20210426 1355
1
WARNING:
Do not use the System Control Unit within the patient's vicinity.
on page 130
on page 70
on page 72