XD 14, XD⁺14
1 2 3
Power button with indicator light
1.
• Press to start the DR detector or to display the status of the DR
detector.
• Press and hold for 3 seconds to stop the DR detector.
AP mode button
2.
• Press to display the status of the DR detector.
• Press and hold for 3 seconds to change the network connection.
Status display
3.
• Battery status
• Connection status
• IP address
• SSID name
Antenna of the wireless network adapter
4.
Operation in wireless configuration.
Battery status indicator
5.
Connector for power adapter (USB Type-C)
6.
DR detector connector
7.
• Operation in wired configuration.
• Charging the battery.
Effective imaging area border and center position indication
8.
Figure 2: DR detector operation controls
XD 14, XD⁺14 | Introduction to the DR Detector | 19
4
4
4
5 6 7
8
0430A EN 20210426 1355