AGFA XD 14 User Manual page 71

XD 14, XD⁺14 | Introduction to the DR Detector | 71
WARNING:
Do not connect the AC or DC power cable to the product with
the power applied. Failure to do so may result in damage to the
product.
WARNING:
Be sure to hold the plug or connector to unplug the power cord.
If you pull the power cord, the core wire may be damaged,
resulting in fire or electric shock.
WARNING:
When using the power supply, care must be taken to ensure that
there is either a mains plug or an all-cable disconnecting device
in the internal installation fitted near the device and that it is
easily accessible in case of emergency.
CAUTION:
Position the power supply so that it is possible to disconnect it
from the mains power if required.
0430A EN 20210426 1355