Table of Contents
Advertisement
18 | DR 18M, DR 24M | Introduction to the DR Detector
DR detector cable and control unit
The DR detector cable connects the DR detector to the DR Detector control
unit.
The DR detector control unit connects the DR detector to the mains power
using a power supply and to the workstation.
Position all components appropriately to prevent that the DR detector cable or
the power cable are unintendedly disconnected.
1
Power switch
1.
Figure 2: Front view of the control unit
4
5
6
7
Indicator light is on when the DR detector is active
1.
Indicator light is on when the DR detector is connected
2.
Indicator light is on when the DR detector power supply is on
3.
DR detector cable
4.
Connector for the DR detector cable
5.
Connector for the network cable to the workstation
6.
Connector for the power cable
7.
Figure 3: Rear view of the control unit
5
DR detector cable
1.
Figure 4: Side view of the DR detector
0380A EN 20180703 1429
1 2 3
Advertisement
Table of Contents
