Configuration - AGFA XD 14 User Manual

14 | XD 14, XD⁺14 | Introduction to the DR Detector

Configuration

The DR detector is a component that can be integrated in an X-ray system and
that communicates to a workstation. Multiple DR detectors can communicate
to a single MUSICA Acquisition Workstation. A DR detector can be used on
more than one MUSICA Acquisition Workstation.
5
6
7
Client mode: the detector connects to the workstation via the built-in
1.
access point of the System Control Unit (SCU).
Client mode: the detector connects to the workstation via a wireless
2.
access point.
Access point mode: the workstation connects to the detector, which is
3.
acting as an access point.
Wired mode: the detector communicates to the workstation via the DR
4.
detector cable.
DR detector
5.
System Control Unit (including a wireless access point)
6.
Workstation
7.
Wireless access point
8.
DR detector cable
9.
Figure 1: Configurations
A DR detector is during installation configured either in client mode or in
access point mode.
0430A EN 20210426 1355
1 2
8
3 4
9