Managing Network Connections In Access Point Mode Configuration - AGFA XD 14 User Manual

Managing network connections in access point mode
configuration
The DR detector is configured for access point mode.
Figure 28: Access point mode
Multiple DR detectors can be used on the same MUSICA Acquisition
Workstation, but they cannot be connected simultaneously.
The DR detector can be used for examinations on a single MUSICA Acquisition
Workstation. The MUSICA Acquisition Workstation connects to the detector,
which is acting as an access point. The user must manually switch the wireless
connection between the hospital network and the DR detector.
Additionally, the DR detector can be switched to client mode. The detector can
be configured upon installation with another MUSICA Acquisition
Workstation (with access point or System Control Unit) to which it will
connect in this status.
Topics:
• Switching between the wireless DR detector and the wireless hospital
network
• Switching temporarily to client mode
• Connecting the MUSICA Acquisition Workstation to another DR
detector (access point mode)
XD 14, XD⁺14 | Advanced Operating | 109
0430A EN 20210426 1355