Creality Sprite Extruder Pro Kit User Manual page 8

If 3D printer restarts during hotend heating up,
please reverse the heating tube connectors on mainboard.
Sprite Extruder Pro Kit Material Guide
Printing with
Dry box
Material enclosure
recommended
recommended
CR-PLA NO NO
CR-TPU NO NO
HP-TPU NO NO
35-45
Retraction speed: mm/s
Retraction distance (direct drive) for rigid materials (PLA):
Retraction distance (direct drive) for soft materials (TPU-95):
The specific values of printing parameters need to be adjusted according to filaments of different manufacturers.
06
Heatbed Nozzle
Retraction Retraction Recommended
temperature temperature
distance speed printing speed
(+- 5°C) (+- 5°C)
0.8mm 40mm/s 60℃ 200℃
2mm 40mm/s 60℃ 230℃
2mm 40mm/s 60℃ 210℃
0.8
mm
2
mm
若打印模型加热喷头时，3D打印机出现重启现象，将加热管主板端
接头位置对调。
使用
耗材
保温罩
50mm/s CR-PLA NO
50mm/s CR-TPU NO
50mm/s HP-TPU NO
回抽速度：
硬质耗材（PLA）回抽距离(近端挤出): 0.8mm
软质耗材（TPU-95）回抽距离(近端挤出): 2mm
具体打印参数需要根据不同耗材生产商做调整。
Sprite Extruder Pro Kit 耗材指引
使用 热床温度 喷嘴温度
回抽距离 回抽速度
耗材干燥盒 (+- 5°C) (+- 5°C)
NO 0.8mm 40mm/s 60℃
NO 2mm 40mm/s 60℃
NO 2mm 40mm/s 60℃
推荐打印速度
200℃ 50mm/s
230℃ 50mm/s
210℃ 50mm/s