Table of Contents
Advertisement
Firmware update
7168.6
7168.S
+
SIMPLIFIED DECLARATION OF CONFORMITY
Graupner/SJ hereby declares that the S1034 Falcon 12 plus complies with the Directive 2014/53/
EU.
Manufacturer
32 / 34
Firmware updates of the Graupner Falcon 12 plus are performed via
port 5 (T) using a PC running Windows 7 ... 10, or Apple or Linux PCs
running Java 8-10. You will also need a USB interface, No. 7168.6, so
as the adapter lead, 7168.S, which are available separately.
The programs and files required can be found in the Download area
for the corresponding products at www.graupner.de.
One of the last two mentioned adapter cables must be connected to
the 7168.S cable and this combination must then be connected to
the USB interface, No. 7168.6. The plug-in system is correspondingly
protected against reverse polarity. Never use force, the plugs should
click easily into place.
Insert the free end of the adapter cable with 2 wires into the con-
nector 5 (T) of the Graupner Falcon 12 plus. Under no circumstances
you should use force here.
After selecting the file and clicking on Start, the Falcon 12 plus
receiver is connected to a voltage source of approx. 5-10 V DC.
The update takes place via the program part "Slowflyer / Gyro
Receiver Downloads" of the program "Firmware_Upgrade_gr_Stu-
dio" available under "Links". Please follow the notes of the software.
The further procedure is also described in detail in the manual con-
tained in the data package. You can also download these from the
download page of the product at www.graupner.de
The full text of the EU Declaration of Conformity is available at the
following Internet address: www.graupner.deNotes on environ-
mental protection
Graupner Co., Ltd
Post Code: 14557
8th F, 202 Dong, Chunui Techno-Park II, 18, 198 Street
Bucheon-ro, Wonmi-Gu, Bucheon-Shi, Gyeonggi-do
South Korea
S1038_Q06_V1.0pn_en
Advertisement
Table of Contents
