Communication Module; Operating Data - Miele PW 6241 Operating And Installation Instructions

The program is resumed automatically when the peak-load function
finishes.

Communication module

The machine can be connected to a PC (personal computer) using
the communication module.
The slot for the communication module is located on the back of the
machine.
An Editor program is available for this from your sales and service
center or your Miele dealer.

Operating data

With the Operating data module, Operating data can be read or
deleted via the  "Operating data" button either before program start
or at the end of the program.
Cottons Hygiene
1
2 Cottons
Cottons Intensive
3
 
Press the  "Operating data" button.

When the  button is pressed, the following appears in the display:
Operating data module
Total data
Program data

You have the following options:
Total data
-
Data from all programs is collected and added together in Total
data.
Program data
-
Program data is data which is recorded during a program.
Delete data
-
Module
- (delete total data and program data)
- Total data (only delete total data)
Program data
- (only delete Program data)
Tip: The function can be deselected by pressing the  "Operating
data" button again.
If the data storage capacity in the Operating data module is full, a
message appears when the "START" button is pressed to inform
you that Operating data will be overwritten.
Optional modules
90 °F
60 °F
60
°F

 


41