Description of the machine
Function buttons
A function is activated when pressed and deactivated when pressed again.
Stop/finish
The right-hand function button is used as the finish button after a program has started.
Pressing the button stops the selected program or finishes a stopped program.
+ Block+
The corresponding program block (e.g., Pre-wash) is added to the program.
Starch stop
Press this button if the laundry is to be starched.
W/o spin
Press this button if a final spin is not required after the final rinse.
Settings
Another language can be temporarily selected by pressing this button.
Delay start
When this button is pressed before starting the program, information about selecting a
start time will appear in the display.
Information
Program information appears in the display when this button is pressed.
Water drainage
Manual control
See programming instructions
Skip / Repeat
The current program can be skipped or program blocks can be repeated.
Back
Return to previous display page.
/ Information on next/previous line
Saving
See programming instructions
Program locked
If a program is locked, after 1 minute it can no longer be stopped or canceled with the fin-
ish button.
Program unlocked
Dispensing
Dispensing switched off
Operating data
Resetting to 0 (taring)
If the load display does not show "00.0" with an empty drum, this can be rectified by
pressing this button.
Data transfer
17