Disassembly With Integrated Drill Drift - Optimum OPTI drill DH 26GT Operating Manual

4.9.3 Disassembly with integrated drill drift


Move the spindle sleeve lever
device for integrated drill drift. The spindle sleeve can thus be moved more upward.
1
ATTENTION!
Hold the tool or drill chuck tight.
3
With the below described procedure the taper mandrel is being loosened from the
drilling spindle. The tool and/or the drill chuck will fall down.

Press the spindle sleeve lever
The taper mandrel is pressed out of the drill spindle.

EN
DH26GT | DH28GS
104
a bit downward until it is possible to turn the interlocking
2
upward.
2
2
Img.4-9: Disassembly with integrated drill drift
Translation of original instruction
1
3
Version 1.2.9 - 2021-09-28