Margins Are Generated On Printed Labels; Margins Of Label Are Large - Epson TM-C3500 User Manual

Margins are Generated on Printed Labels

This is normal, and not a failure of
the printer.

Margins of Label Are Large

The margin setting is too large.
Downloaded from ManualsNet.com
Cause
Cause
search engine
Solution and Reference
If Borderless Printing is not enabled on Options tab of the
printer driver, an area which is the label size excluding margins
of 1.5 mm at the top, bottom, left, and right becomes the
printable size.
If you wish to set the entire area of the label size as the printable
area, enable Borderless Printing.
When Borderless Printing is enabled, edges of label image
may be printed on the backing paper, so create margins of 1.5
mm at the top, bottom, left, and right in the label image data.
Solution and Reference
Check the margin settings in the application and then set the
top, bottom, left, and right margins to 1.5mm.
154