1
Check that the printer is powered off.
2
Open the ink cartridge cover and remove the dip switch cover.
3
Use an object with a sharp tip to operate the dip switches.
The dip switches are numbered in order from the left. Up is the ON state
and down is the OFF state. Set dip switch 8 to ON to set a high volume, and
set it to OFF to set a low volume.
4
Attach the dip switch cover and close the ink cartridge cover.
Adjustment of the volume of the buzzer is now complete.
Downloaded from
ManualsNet.com
1
search engine
2
3
4
5
6
7
ON (high volume)
8
OFF (low volume)
101