Die-cut Labels (Black Marks) and Fanfold Paper
When Borderless Printing Enabled
Margins at top, bottom, right, and left (inside label): 0 mm (typical value)
Waste part 2.0 mm
c
IMPORTANT
Q
Downloaded from
ManualsNet.com
Backing paper width
Paper width
center
Perforated line
Auto cut position
Auto cut position
Perforated line
Auto cut position
• Set the perforated line interval so that it becomes an integral multiple of
the issuing interval.
• To prevent unstable printing due to the perforated line and print area
overlapping or shortening of the cutter life due to the perforated line and
auto cut line positions overlapping, use paper with black marks on the
back to align the paper position.
The maximum value of the print area width is 104 mm.
Note
search engine
Waste part 2.0 mm
Print area width
*1: When not auto cutting, 8.0 mm or more
*2: When not auto cutting, 11.0 mm or more
Paper feed
direction
Print area
Label
Backing paper
Black mark position
(back side)
188