Epson TM-C3500 User Manual page 15

Do not open an ink cartridge package until you are ready to install the
CAUTION
ink cartridge in the product.
Wait at least four seconds for the internal operation to stop after
opening the ink cartridge cover.
If you remove an ink cartridge in less than four seconds, ink may spurt out.
Do not shake an ink cartridge too hard.
The ink cartridge may leak if you shake it around too much or push the
sides strongly.
Do not allow foreign objects to fall into the cartridge installation
section.
Doing so may result in normal printing becoming no longer possible.
Remove any object that falls into the installation section, taking care not to
damage the section.
When ink is charged the first time (right after purchase), ink is
consumed for filling the print head nozzles (ink discharge holes) to
get ready for printing. Therefore, the number of the sheets that can be
printed may be fewer than for cartridges installed later.
If you turn the power off using the power button on the product, the
print head is automatically capped to prevent the ink from drying.
After installing the ink cartridges, be sure to turn the power off with
the power button when you will not use the product. Do not pull out
the power plug or turn off the breaker while the power is on.
Printing on water-repellent paper such as art paper, which is slow-
drying, may cause print stains. Also, if you print on glossy paper,
fingerprints may get on the paper or ink may adhere to your fingers
when you touch the print surface. Select and use paper that will not
cause print stains.
Store the ink cartridges in a place out of reach of children.
Epson recommends storing ink cartridges in a cool and dark place.
If you wish to use ink cartridges that have been stored in a cold place
for a long period of time, leave them for at least 3 hours in a place that
is at room temperature before use.
Do not remove the ink cartridges from the product when storing or
transporting the product.
15
Downloaded from ManualsNet.com search engine