Product Makes Noise When It Sits For A While; Copies Have Incorrect Or Faint Colors; Position, Size, Or Margins Of Copies Are Incorrect; Solving Paper Problems - Epson ET-2400 User Manual

Product Makes Noise When It Sits for a While

Your product is performing routine maintenance. This is normal.
Parent topic:

Copies Have Incorrect or Faint Colors

If your copies have incorrect, uneven, smeared, or faint colors, try these solutions:
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if
necessary.
• Do not press too hard on the original when you copy from the scanner glass.
• Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the
cloth, if necessary. Paper towels are not recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
• Wipe any dirt or dust off of your originals.
• Make sure your paper is not curled.
• When vertical banding appears or the paper is smeared, clean the paper path.
• When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the
correct direction and slide the edge guides to the edges of the paper.
Parent topic:

Position, Size, or Margins of Copies are Incorrect

If the position, size, or margins of your copies are incorrect, try these solutions:
• When placing originals on the scanner glass, make sure the original is placed correctly for scanning.
Align the corner of the original with the corner indicated by the symbol on the scanner glass. If
necessary, move the original away from the edges of the scanner glass slightly.
• Make sure the paper is loaded in the correct direction.
Parent topic:

Solving Paper Problems

Check these sections if you have problems using paper with your product.
Paper Feeding Problems
Solving Copying Problems
Solving Copying Problems
Solving Copying Problems
171