Operation Panel
1
LCD
Displays messages and the printer status.
(U
2
Cut button
Cuts the paper.
3
Dip switches
Operate these switches when configuring the following settings.
• When changing the display language of the LCD (U
• When changing the volume of the buzzer (U
• When expanding the print area (U
151)
• When attaching the power switch cover and setting the power switch to not operate
(U "Developer's Guide")
4
LCD contrast adjustment buttons
Operate these buttons when adjusting the contrast of the LCD.
• Pressing the left button increases the contrast and pressing the right button reduces the contrast. Once
adjusted, the setting is retained even if the power is turned off. (U
Downloaded from
ManualsNet.com
1
2
"Checking the Printer Status" on page
search engine
7
3
4
68, U
"Setting the LCD" on page
"Display Language" on page
"Buzzer" on page
"Unintended Top and Bottom Margins are Generated" on page
6
5
39)
39)
100)
"Contrast Adjustment" on page
41)
22