Blueforce Smart Pro Features - Microtronics BLUEFORCE SMART PRO Instructions For Use Manual

BlueForce Smart Pro features

BlueForce Smart Pro is equipped with a lithium-ion battery that can be recharged via USB using the cable
supplied. See page 23 for more information on charging.
Saved measurements can be transferred to the Blueforce software, previously installed on the computer, using
the supplied USB cable. The BlueForce software allows you to manage your measurements, customers and print
reports. N.B. for installation of BlueForce software see page 14.
Built-in clock: saving the measurements taken includes date and time for immediate identification.
For each measurement it is possible to assign the reference of the measurement point "in situ", according to
the indications of the EN12453 Standard (shown in the supplied "Quick Guide" leaflet).
For each measurement, the evaluation of the parameters according to the EN12453 Standard is automatically
displayed. (Passed / failed test with flashing of incorrect parameter on display, see page 6)
Automatic recognition of the instrument orientation (vertical, horizontal left, horizontal right) to simplify the
association of measurements with the corresponding door type and its measuring point.
It is possible to use the instrument to test the pushing force (e.g., for panic handles), using the additional
continuous dynamometric measuring function.
Processor firmware updateable directly from the instrument wirelessly via web with automatic download from
the remote server.
FTP wireless thermal printer (optional): possibility to print short measurement reports in receipt format directly
on site, see page 13.
- 3 -