Table of Contents
Advertisement
STEP 1
1. Open the carton, take out the above spare parts and place the Main Frame on level ground.
STEP 2
1. Holding onto the upright tube, use the 5# Allen wrench to lock the bolt (56) and lock washer (67) on
the left upright and base frame and secure the upright to base frame, as pictured.
2. Use the 5# Allen wrench to lock the bolt (60) and lock washer (67) onto the left upright and base
frame and secure the upright to base frame, as pictured.
3. Repeat the same steps for the Right upright tube.
CAUTION:
During assembly, support the Upright Tubes with your hand to prevent them from falling.
8
| ASSEMBLY INSTRUCTIONS
67
60
67
56
60
67
67
56
Advertisement
Table of Contents
