Table of Contents
Advertisement
STATIC ELECTRICITY PRECAUTION
CAUTION! This device contains static sensitive circuit cards and components. Improper
handling of these devices or printed circuit cards can result in damage to or destruction of
the component or card. Such actual and/or consequential damage IS NOT covered
under warranty and is the responsibility of the device owner. Electronic components
must be handled only by qualified electronic technicians who follow the guidelines listed
below:
ATTENTION! ALWAYS use a properly grounded wrist strap when handling, removing or
installing electronic circuit cards or components. Make certain that the wrist strap ground
lead is securely attached to an adequate ground. If you are uncertain of the quality of the
ground, you should consult a licensed electrician.
ALWAYS handle printed circuit card assemblies by the outermost edges. NEVER touch
the components, component leads or connectors.
ALWAYS observe warning labels on static protective bags and packaging and NEVER
remove the card or component from the packaging until ready for use.
ALWAYS store and transport electronic printed circuit cards and components in anti-
static protective bags or packaging.
FCC COMPLIANCE STATEMENT
WARNING! This equipment generates, uses and can radiate radio frequency and if not installed
and used in accordance with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide reasonable
protection against such interference when operated in a commercial environment. Operation of
this equipment in a residential area may cause interference in which case the user will be
responsible to take whatever measures necessary to correct the interference.
You may find the booklet "How to Identify and Resolve Radio TV Interference Problems" prepared by the Federal
Communications Commission helpful. It is available from the U.S. Government Printing Office, Washington, D.C.
20402. Stock No. 001-000-00315-4.
All rights reserved. Reproduction or use, without expressed written permission, of editorial or
pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to the
use of the information contained herein. While every precaution has been taken in the preparation
of this manual, the Seller assumes no responsibility for errors or omissions. Neither is any liability
assumed for damages resulting from use of the information contained herein. All instructions and
diagrams have been checked for accuracy and ease of application; however, success and safety
in working with tools depend to a great extent upon the individual accuracy, skill and caution. For
this reason the Seller is not able to guarantee the result of any procedure contained herein. Nor
can they assume responsibility for any damage to property or injury to persons occasioned from
the procedures. Persons engaging the procedures do so entirely at their own risk.
2
Advertisement
Table of Contents
