4. 1 Pulizia sistema ottico e manutenzione Certificato di garanzia CONTENUTO DELL’IMBALLO: • NEWMOON • Cavo di alimentazione con spina • Manuale utente Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso.
NEWMOON ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con atten- zione questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SICUREZZA Avvertenze generali • I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e pertanto recano la sigla .
NEWMOON INFORMAZIONI GENERALI Spedizioni e reclami Le merci sono vendute “franco nostra sede” e viaggiano sempre a rischio e pericolo del distributore/cliente. Eventuali avarie e danni dovranno essere contestati al vettore. Ogni reclamo per imballi manomessi dovrà essere inoltrato entro 8 giorni dal ricevimento della merce.
NEWMOON - 1 - DESCRIZIONE E SPECIFICHE TECNICHE 1.1 Elementi di comando e collegamenti 12 34 56 78 91 0 DMX IN DMX OUT POWER INPUT 240/50Hz Fig.1 1. STAFFA DI MONTAGGIO 2. MANOPOLA DI FISSAGGIO per la staffa di montaggio.
- 2 - INSTALLAZIONE 2.1 Montaggio Il NEWMOON, grazie alle possibilità di fissaggio sulla staffa (fig.2), può essere montato anche capovolto, su una traversa. Per il fissaggio occorrono dei supporti robusti per il montaggio. L’area di collocazione deve avere una stabilità sufficiente e supportare almeno 10 volte il peso dell’unità.
3.2 Impostazione dei DIP-switch Il NEWMOON dispone di un pannello di controllo base costituito da un modulo DIP-switch (fig.3). Ciascuno dei singoli switch dispone di un numero (DIP switch [1] a [10]).
È possibile selezionare la velocità di esecuzione dei programmi pre-impostati, in ordine crescente, utilizzan- do i DIP-switch da [5] a [8]. NOTA - Nella modalità automatica il NEWMOON è impostato come unità principale (Master), mentre le altre saranno impostate come unità secondarie (Slave).
• Per impostare l’unità come SLAVE, posizionare il DIP-switch [10] su “ON”. Fig.10 Modalità Slave • Servirsi dei connettori DMX del NEWMOON e di un cavo XLR per formare una catena di unità. In certe condizioni e lunghezze si consiglia di effettuare una terminazione come mostrato a pagina 11.
NEWMOON 3.7 Collegamenti della linea DMX La connessione DMX è realizzata con connettori standard XLR. Utilizzare cavi schermati, 2 poli ritorti, con impedenza 120Ω e bassa capacità. Per il collegamento fare riferimento allo schema di connessione riportato di seguito: DMX - INPUT...
DMX per il primo canale DMX. Se, per esempio, sull’unità di comando è previsto l’indirizzo 33 per comandare la funzione del primo canale DMX, si deve impostare sul NEWMOON l’indirizzo di start 33. Le altre funzioni del pannello saranno assegnate automaticamente agli indirizzi successivi. Segue un esempio...
4 Maintenance 4. 1 Cleaning the unit and maintenance Warranty PACKING CONTENT: • NEWMOON • Power cord with plug • User manual All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be. Reproduced in any form or by any means for any commercial use.
NEWMOON WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instructions • The products referred to in this manual conform to the European Community Directives and are therefore marked with .
NEWMOON GENERAL INFORMATION Shipments and claims The goods are sold “ex works” and always travel at the risk and danger of the distributor. Eventual damage will have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days from the reception of the goods.
NEWMOON - 1 - DESCRIPTION AND TECHNICAL SPECIFICATIONS 1.1 Operating elements and connections 12 34 56 78 91 0 DMX IN DMX OUT POWER INPUT 240/50Hz Fig.1 1. MOUNTING BRACKET 2. LOCKING KNOB for the mounting bracket. 3. DIP-switch [9] and [10] to set the operating mode.
- 2 - INSTALLATION 2.1 Mounting NEWMOON can be fixed (as shown below) using the mounting bracket screws or using the dedicated light- ing support if mounted on a crossbeam. To align the light effect unit, release the locking screws (fig.2); ad- just the desired inclination of the unit, then retighten the screws.
3.2 Setting of DIP-switch The NEWMOON has a basic control panel consists of a DIP-switch (fig.3) Each individual switch has a number (DIP-switch [1] to [10]).
It can select the speed of execution of pre-set programs, in ascending order, using the DIP-switch from [5] to [8]. NOTE. in automatic mode the NEWMOON is set as the master unit (MASTER), while the other will be set as slave units (SLAVE)
Fig.9 Music mode 2 3.5 Master/Slave mode This mode allows you to connect multiple units NEWMOON online without a controller. The first unit will be set as master and the other will work as a slave with the same effect.
NEWMOON 3.7 Connection of the DMX line DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: DMX - INPUT DMX - OUTPUT XLR plug XLR socket...
3.9 Adjusting the start address To able to operate the NEWMOON with a light controller, adjust the DMX start address for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan- nel, adjust the start address 33 on the NEWMOON.