Table of Contents
Advertisement
8.4
Adjusting the basic position of the clutch lever
–
Remove screws
Position the handlebar so that screws
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove screws
–
Move the handlebar supports into the desired
B
position
,
Guideline
Mount the left and right handlebar supports in the same
position.
Screw, handle-
bar support
–
Position the handlebar.
F01907-10
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp. Mount screws
evenly.
Guideline
Screw, handlebar
clamp
–
Push clutch lever forward.
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
Info
When the adjusting screw is turned clockwise, the
clutch lever moves closer to the handlebar.
When the adjusting screw is turned counterclockwise,
the clutch lever moves away from the handlebar.
V02346-11
The range of adjustment is limited.
Only turn the adjusting screw by hand, and do not use
force.
Do not make any adjustments while riding.
1
. Take off the handlebar clamps
3
3
. Take off handlebar supports
A
C
or
. Mount and tighten screws
M10
45 Nm (33.2 lbf ft)
M8
1
.
ERGONOMICS 8
2
.
are accessible.
4
.
3
.
®
Loctite
243™
1
and tighten
20 Nm (14.8 lbf ft)
57
Advertisement
Table of Contents
