Removing The Front Fender; Installing The Front Fender - Husqvarna Norden 901 2022 Owner's Manual

13.26

Removing the front fender

13.27

Installing the front fender

SERVICE WORK ON THE CHASSIS 13
–
Mount screws
Guideline
Screw, trim
The front edge of the right fuel tank spoiler is evenly
aligned.
–
Tighten all the screws of the right fuel tank spoiler.
Guideline
Screw, trim
V02382-10
Finishing work
–
Install the center fuel tank spoiler. (
–
Install the battery cover. (
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Remove screws
–
Take the fender off to the front.
Info
Pay attention to the brake lines and the cable.
V02386-10
–
Position the fender. Mount screws
Info
Pay attention to the routing of the brake lines and the
cable.
–
Mount and tighten screws
Guideline
Screw, trim
V02386-10
2
, but do not tighten yet.
M5 3 Nm (2.2 lbf ft)
M5 3 Nm (2.2 lbf ft)
p. 90)
p. 89)
p. 81)
p. 81)
1
.
1
, but do not tighten yet.
1
.
M5 3 Nm (2.2 lbf ft)
93