Table of Contents
Advertisement
7.24.3
ABS Mode
COMBINATION INSTRUMENT 7
–
Press the UP or DOWN button until Ride Mode is
highlighted. Press the SET button to open the menu.
–
Activate the menu item using the UP or DOWN button.
–
Press the SET button to select the Ride Mode, which
changes coordinated settings for the engine and motorcycle
traction control.
Guideline
Only use riding modes Street and Rain on asphalt.
Only use riding modes Offroad and Explorer (optional) on
unpaved roads.
Street - Homologated performance with balanced
response; the motorcycle traction control allows normal
slip on the rear wheel. The Anti-Wheelie mode is active.
Rain - Reduced homologated performance with soft
response for improved rideability on surfaces with low
road grip; the motorcycle traction control allows very
little slip on the rear wheel. The Anti-Wheelie mode is
active.
Offroad- Reduced homologated performance for bet-
ter rideability on unpaved roads; the motorcycle trac-
tion control allows high slip on the rear wheel. The Anti-
Wheelie mode is deactivated.
Explorer (optional) - Setting with homologated perfor-
mance and extremely direct response. The motorcycle
traction control and the characteristics of the throttle
response can be set individually. The Anti-Wheelie mode
is deactivated.
Info
Do not open the throttle during the selection.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is high-
lighted. Press the SET button to open the menu.
–
Press the UP or DOWN button until ABS Mode is
highlighted. Press the SET button to open the menu.
–
Activate the menu item using the UP or DOWN button.
Warning
Danger of accidents An incorrectly selected ABS
V02212-01
mode makes control of the vehicle considerably more
difficult.
The ABS modes are each only suitable for certain
conditions.
–
Always select an ABS mode that is compatible
with the surface of the ground.
–
Press the SET button to select the desired ABS mode.
39
Advertisement
Table of Contents
