Riding Instructions; Checks And Maintenance Measures When Preparing For Use; Starting The Vehicle - Husqvarna Norden 901 2022 Owner's Manual

10 RIDING INSTRUCTIONS

10.1
10.2
Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
–
Always run the engine warm at a low speed.
64

Checks and maintenance measures when preparing for use

Info
Before every trip, check the condition of the vehicle and ensure that it is roadworthy.
The vehicle must be in perfect technical condition when it is being operated.
H02217-01

Starting the vehicle

Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use effective exhaust extraction when starting or running the engine in an enclosed space.
B00782-10
–
Check the engine oil level. (
–
Check the front brake fluid level. (
–
Check the rear brake fluid level. (
–
Check the front brake linings. (
–
Check the rear brake linings. (
–
Check that the brake system is functioning properly.
–
Check the coolant level in the compensating tank. (
–
Check the chain for dirt. (
–
Check the chain tension. (
–
Check the tire condition. (
–
Check tire pressure. ( p. 113)
–
Check the settings of all controls and ensure that they can be
operated smoothly.
–
Check that the electrical system is functioning properly.
–
Check that luggage is properly secured.
–
Sit on the motorcycle and check the rear mirror setting.
–
Check the fuel level.
–
Take the motorcycle off the side stand and sit on the motor-
cycle.
–
Make sure that the start button/emergency OFF switch is in
the middle position .
–
Switch on the ignition by turning the ignition key to the posi-
tion .
Guideline
To avoid malfunctions in the control unit communication,
do not switch the ignition off and on in rapid succession.
p. 133)
p. 101)
p. 103)
p. 102)
p. 105)
p. 128)
p. 82)
p. 83)
p. 112)