7.24.31 Shift Light RPM2
7.24.32 Clock & Date
7.24.33 Clock Format
COMBINATION INSTRUMENT 7
Info
RPM1 can be set in intervals of 500 between 5,500
and 10,000 rpm.
RPM1 must not be larger than RPM2.
If the engine speed reaches set value RPM1, the shift
warning light flashes yellow.
Condition
•
The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Shift Light is highlighted.
Press the SET button to open the submenu.
–
Press the UP or DOWN button until RPM2 is highlighted.
–
Activate the menu item using the UP or DOWN button.
V02235-01
–
Press the SET button to switch the value for RPM2 on or off.
Info
RPM2 can be set in intervals of 500 between 7,000
and 10,000 rpm.
RPM2 must not be smaller than RPM1.
If the engine speed reaches set value RPM2, the
entire display flashes yellow.
Condition
•
The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Clock & Date is high-
lighted.
–
Press the SET button to open the menu.
In Clock & Date, the time, date, and display formats can be set.
V02236-01
Condition
•
The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Clock & Date is high-
lighted.
–
Press the SET button to open the menu.
–
Press the UP or DOWN button until Clock Format is high-
V02237-01
lighted. Press the SET button to open the menu.
–
Activate the menu item using the UP or DOWN button.
–
Press the SET button to select the time format.
51