Example 2: Aligning Blocks Within A Tape Label - Casio CW-L300 User Manual

7.
After selecting the alignment setting, use
B-LENGTH setting screen.
8.
Use and to change the setting to FIX, and then press
9.
Use the number keys, or the
crease the length of the block, and then press SET.
• If a block contains multiple lines, you can also align its text using the
B-LENGTH AUTO setting. In this case, alignment will be performed
on the shorter line of text as shown below.
LEFT EQUAL
30
E
and to scroll to the
Length value becomes
highlighted.
(decrease) and (increase) keys to in-
CENTER RIGHT

Example 2: Aligning blocks within a tape label

LEFT
.
EQUAL
CENTER
RIGHT
Important!
• The block alignment setting is applied only when FIX is selected for the
T-LENGTH setting.
■ To align blocks within a tape label
1.
In the Free Design Mode, input the text you want, and divide it into blocks
as required.
• See page 22 for information about blocks.
2.
Press FORM.
• If your label has only one block, advance directly to step 4 of this
procedure.
3.
Use and
4.
Use and
5.
Use and
to select ALL FORM, and then press SET.
to scroll to the T-LENGTH setting screen.
to change the setting to FIX, and then press
Length value becomes
highlighted.
.