Tape Mode - Casio CW-L300 User Manual

Symptom Possible Cause
I cannot A tape cartridge is
insert a
loaded in the printer.
disc into
the printer.
Printing will
The disc is not
not start.
positioned correctly in
the printer.
Recommended Action
A disc cannot be inserted into
the printer while a tape
cartridge is loaded. Remove
the tape cartridge and replace
it with an ink ribbon cassette.
(Startup Guide, page 11)
Remove the disc and then re-
insert it straight into the left
side of the slit along the top of
the printer. (Startup Guide,
page 20)

TAPE Mode

Symptom Possible Cause
The printing The tape is used up.
operation is
finished
normally,
but nothing
is printed.
Printing is
The tape cartridge is
not clear.
not loaded properly.
Printing is
The print density
poor
setting is too light.
quality.
Printing is
too light.
No tape The cassette cover is
comes out not closed completely.
when I
The tape is used up.
press
PRINT.
The tape is jammed.
Recommended Action
Replace the tape cartridge
with a new one.
Re-load the tape cartridge
properly.
Adjust the print density to
make it darker.
Close the cassette cover.
(Startup Guide, page 5)
Replace the tape cartridge
with a new one. (Startup
Guide, page 13)
Remove the tape cartridge and
pull out the jammed tape. Use
scissors to cut off the tape you
pulled out. Load the tape
cartridge back into the printer.
(Startup Guide, page 13)
Important!
Note the following while
printing is in progress.
• Do not allow the tape outlet
to become blocked.
• Do not touch the tape
coming out of the printer.
• Do not open the cassette
cover.
• Do not turn off the printer.
61
E