Free Design: Using Frames - Casio CW-L300 User Manual

FREE DESIGN: Using Frames

The printer comes with a selection of built-in frames that you can use in your
tape labels. See page 69 for a list of frames that are available.
Example
■ To add a frame to a tape label
1.
In the Free Design Mode, input the text you want.
2.
Press FRAME.
3.
Use the cursor keys to select the frame you want, and then press SET.
• Here we will select
4.
Use and to select PRINT, and then press SET .
5.
Use the number keys (or
and then press .
• You can specify a value from 1 to 100 for the number of copies.
6.
Use and to select the tape cut mode (page 38), and then press
SET.
• This starts the print operation.
• The BOX text attribute is not applied when printing with a frame.
18mm wide tape, Frame Number 55
.
and ) to specify the number of copies,
Frames and the Number of Lines
The number of lines that can be printed with a frame depends on the
width of the tape.
24/18mm
Number of Lines
Up to 6
with Frame
12mm 9mm 6mm
Up to 3 Up to 2 1
35
E