Table of Contents
Advertisement
2. Enter the Test Menu and use the UP/DOWN button to select Fixture Model(Figure 2), press the
ENTER button to confirm, press the MENU button to exit.
Figure 2
3. Use the UP/DOWN button to select the corresponding model on Select Model page (Figure 3), press
the ENTER button to restore, press the MENU button to exit.
Figure 3
4. Enter into the test page (Figure 4, Figure 5) and press the green button to start testing.
Figure 4
6C
Figure 5
Advertisement
Table of Contents
Need help?
Do you have a question about the V-BOX and is the answer not in the manual?