Table of Contents
Advertisement
6-2 Connector crimping procedure
① Required tools: Hand-held crimping tool
Model
Dice No.
Crimping width
② Connector: ME-GP-01
③ Processing procedure
Put through a sleeve to an end-processed high
frequency coaxial cable.
Insert a contact into the internal conductor and crimp.
Put a contact into dice having a
diamond shape and closely stick its
end surface with the insulator and the
dice. Pull the moving frame to the
fixing frame side and crimp until the
ratchet is removed.
(Crimping width: 2.2 mm)
* Use the crimping tool in the direction
shown in the illustration right.
Using the crimping tool in the reverse
direction will not crimp correctly.
To the next page
: ME-42H
: 67-42H
: 10 mm
<Insert a sleeve>
<Crimping contact>
Widen a little Crimp Dice blade shape
2.2 mm
Closed contact
6
Sleeve
Internal conductor
Crimping dice
Insulator
5
·
Connector parts
Contact
Shell
A
B
A: 10±0.5 mm
B: 4±0.5 mm
Sleeve
Contact
Fixing frame
TT - 237
Moving frame
Crimping dice
Contact
Closed
contact
TT TT - 237
237
6
Advertisement
Table of Contents
