Control Panel - Supermicro SuperServer SSG-540P-E1CTR36L User Manual

Control Panel

Feature Description
The main power switch applies or removes primary power from the power supply to the server
Power button
but maintains standby power.
Reset Button Reboots the system
Indicates power is being supplied to the system power supply units. This
Power LED
LED is illuminated when the system is operating normally.
HDD Indicates activity on the storage drives when flashing.
NIC LEDs Indicates network activity on LANs when flashing.
Power Fail LED Indicates a power supply module has failed.
Information LED Alerts operator to several states, as noted in the table below.
Color, Status
Red, continuously
Red, blinking at 1Hz
Red, blinking at 0.25Hz
Blue, solid
Blue, blinking
Power
Reset
Power LED
HDD
NIC LED
NIC LED
Information LED
Power Fail LED
Figure 1-2. Control Panel
Control Panel Features
Information LED
Description
An overheat condition has occurred.
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power
supply.
UID has been activated locally to locate the
server in a rack environment.
UID has been activated using the BMC to locate
the server in a rack environment.
12
Chapter 1: Introduction