Cleaning And Care - Powerfix Profi 283350 Operation And Safety Notes

Now drill the hole in board B.
Then insert a dowel
(not included) in the hole (see Fig. N).
Repeat this process as often as necessary.
Drilling holes (flat joints)
Note: This requires a cordless drill.
CAUTION! RISK OF INJURY! Please refer to
your cordless drill's instructions for use.
Secure boards A and B parallel in the work-
bench.
First mark the centre line on both boards (see
Fig. F) and the location where you wish to drill
the hole in board A with an „x".
Apply the product to the board and adjust the
rip fence so the selected jig is exactly in the
7
location marked „x". You can check and if nec-
essary correct the positions of the mark using
the measuring scale
product (see Fig. G).
Drill the hole in the marked location on board
A (see Fig. O).
Remove the guide
stall the guide into lower rail so it faces down
(see Fig. P).
Align the product so the guide is inside the pre-
viously drilled hole in board A and the selected
jig is exactly over the line on board B (see Fig. P).
Now drill the hole in board B.
Then insert a dowel
(not included) in the hole (see Fig. Q).
Repeat this process as often as necessary.
Drilling holes
(dowel holes for shelves)
Note: This requires a cordless drill.
CAUTION! RISK OF INJURY! Please refer to
your cordless drill's instructions for use.
Make lines in the respective locations on the
board you are working on (see Fig. R).
Drill the first hole in the designated location.
coated with wood glue
3
on both sides of the
8
from the product and in-
9
coated with wood glue
3
Remove the guide
stall the guide into lower rail so it faces down
(see Fig. S).
Align the product so the guide
previously drilled hole and the selected jig is
exactly over the line (see Fig. S).
Now drill the remaining holes.

Cleaning and Care

Only clean with a dry, lint-free cloth.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
from the product and in-
9
is inside the
9
GB 7