Mounting The Tube Attachment; Cleaning And Care; Disposal - Powerfix Profi Z29760A Operation And Safety Notes

Mounting the tube attachment

Q
The tube attachment is intended for clamping tubes with a diameter
of 38 - 43 mm.
1. Release the hexagonal socket head screw
the spindle using the supplied hexagon socket screw key
2. Turn the vice jaws tommy bar
spindle is turned out of the rear jaw
10
3. Using the supplied hexagon socket screw key
hexagonal socket head screw
base and remove the spindle
11
4. Now that the hexagonal socket head screw
remove it and take the vice base off the ball joint
5. Place the tube attachment
fasten it in place with the hexagonal socket head screw
6. Turn and tilt the ball joint

Cleaning and care

Q
j
C lean the product with a dry, fluff-free cloth.
j
N ever use aggressive or corrosive cleaning agents, as they
may damage the product.

Disposal

Q
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of
how to dispose of your worn-out product.
Use / Cleaning and care / Disposal
9
on to the ball joint
13
to achieve the right position.
5
at the end of
3
anticlockwise until the
.
2
12
on the underside of the vice
8
from the vice.
10
4
.
12
, release the
is accessible,
.
5
and
5
.
4
GB/MT 25