HOMCOM A90-254 Assembly & Instruction Manual page 8

1. SCAN: Press the "MODE" button to select the function to "TIME", at which time the
appear on the left of the monitor and monitor will rotate through all the 6 functions:time, speed,
distance, odometer, calorie and pulse. Each display will be hold 6 seconds. In the process of cyclic
display of Each function, press "MODE" button once to make the "SCAN" appear disappear in any
function mode to display this function.If you want to return to "SCAN" again, press the "MODE" button
to select the function to "TIME".In "SCAN" mode, the "SCAN" word on the left of the monitor flashes
continuously.
2. TIME: Display the time from exercise start to end.
3. SPEED: Display current speed.
4. DISTANCE: Display the distances from exercise start to end.
5. ODOMETER: Monitor will display the total accumulated distance, after the battery is reinstalled, the
value will return to zero.
6. CALORIES: Display the calories burned from exercise start to end.
7. PULSE: Measure the user's heart rate.Press the button to switch to the pulse function, and hold the two
heartbeat sensors in both hands to measure the heart rate ( If the computer has wireless heartbeat
function, please wear the wireless heartbeat chest belt before measuring the pulse rate. ).
Remark: During the process of pulse measurement, because of the contact jamming, the measurement
value may be higher than the virtual pulse rate during the first 2~3 seconds, then will return to normal
level. The measurement value can not be regarded as the basis of medical treatment.
"SCAN" words