Kohler 6VSG Service Manual page 88

Generator Disassembly
1. Remove the two bolts from the center of the
rubber isolators.
Figure 6-7
1
1. Mounting bolts
Figure 6-7 Removing Mounting Bolts
2. Lift up on the back of the alternator and place a
wood support under the engine.
Figure 6-8
1. Engine support
Figure 6-8 Wood Support for Engine
88 Section 6 Disassembly/Reassembly
KPS_134
1
KPS_125
3. Remove the four nuts holding the end cap on the
stator and remove the end cap.
Figure 6-9
1. End cap nuts
2. End cap
Figure 6-9 Removing End Cap
4. Pry lightly between the adapter and the stator to
separate them slightly and tap on the top bracket
on stator.
5. Slide the stator away from the rotor using the
guides on the stator.
1
1
KPS_126
TP-6844 1/13
2