Kohler 6VSG Service Manual page 87

Figure 6-3
2
1. Four bottom screws
2. Three top screws
Figure 6-3 Left-Side Panel
6. Remove rear panel:
Note: The two bottom screw holes are slotted and
only need to be loosened.
a. Loosen the two bottom screws.
b. From the rear, slide the panel to the left side
and lift up and off.
Figure 6-4
1
1. Two bottom screws
Figure 6-4 Remove Rear Panel
TP-6844 1/13
Remove the Muffler
1. Remove the two bolts and nuts from the muffler
bracket.
2. Remove the four nuts from the exhaust flanges.
Figure 6-5
1
KPS_121
1. Two muffler bracket bolts and nuts
2. Four exhaust flange nuts
Figure 6-5 Removing Muffler
3. Remove the two bolts and nuts holding the heat
shield to the alternator.
Figure 6-6
1. Two heat shield bolts and nuts
KPS_122
Figure 6-6 Removing Heat Shield
1
1
Section 6 Disassembly/Reassembly
2
KPS_123
KPS_124
87