Software Packages - Mitsubishi A1SJH User Manual

2. SYSTEM CONFIGURATION
2.2.2

Software packages

Peripheral Software
device package
SW[ ]IVD-GPPA *
MELSEC MEDOC
IBM PC/AT
MELSEC MEDOC
plus
GX Developer
SW3GP-GPPAEE
A6PHP
SW4GP-GPPAEE
SW3-GPPAEE
A6GPP SW3GP-GPPAEE
SW4GP-GPPAEE
* Selected model names differ as shown below, depending on the version of the software package:
Type
Model name Select "A0J2H"
SW4GP-GPPA
SW3RXV-GPPA
SW3NX-GPPA
SW3IVD-GPPA
(1) Specifying the system startup software package and startup model
(a) For AnSHCPU, startup with the PLC model "A3."
(b) Perform the PLC type setting as shown below when using conventional
peripheral devices.
A1SJH(S8)/
A1SH
A3 *
A1SJH/A1SH
A3 *
For ROM writing
Select "A1S"
Q or earlier R or later
30D or earlier
60G or earlier
60G or earlier
POINT
(1) Take note that old software packages other than the SW3-GPPA, SW3-
HGPA, SW3GP-GPPA and SW4GP-GPPA cannot be used for system
startup software packages when the A6GPP/A6PHP is used.
(2) Take caution when using a software version that selects "A0J2H" or
"A1S" for ROM writing, since the file register area of 8k points is reduced
to 4k points.
To measure this, use a software package for which A1SJH/A1SH can be
selected.
CPU type
A2SH A2SH-S1
A3 A3
A2SH A2SH1
A3 A3
Select "A1SH"
40E or later
70H or later
70H or later
2 - 8
MELSEC-A
Remarks
EPROM write not possible.
*
EPROM write not possible.
*
For programming
Select "A3" Select "A1SH"
All versions
30D or earlier
60G or earlier
60G or earlier
40E or later
70H or later
70H or later