Mitsubishi A1SJH User Manual page 77

6. BASE UNIT AND EXTENSION CABLE
(3) Mounting/removing on/from a DIN rail
(a) Mounting procedure
Mount a base unit on a DIN rail as follows :
1) Engage the hook of the base unit with the rail from above rail.
2) Push the base unit onto the rail and fix it in position.
DIN rail hook
Base unit
(b) Removing procedure
Remove a base unit from the DIN rail as follows :
1) Pull down the bottom hook of the base unit using a flat blade
screwdriver.
2) Pull the base unit away from the rail while pulling down the bottom
hook.
Base unit
Flat blade
Bottom
screwdriver
hook
6 - 10
MELSEC-A
Module
Modules mounted to DIN rail
Pull to remove
DIN rail
Module