Menu Bar - Sanyo PLC-XM80 Owner's Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 73-75.
Main Menu
①
Ç
É
Ñ
Ö
Ü
á
à
â
ä
Input
①
Used to select an input source (Input 1, Input , Input  ) (p.33).
Ç PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
É Image select
For computer source, used to select an image level among Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Standard, Cinema, and Image 1-10 (p.46).
Ñ Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp ./White balance (R/G/B)/
Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).
For Video source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp ./White balance (R/G/
B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).
Ö Screen
For computer source, used to adjust the size of the image. [Normal/True/Wide/Full/Custom/Digital zoom +/-/Keystone/
Ceiling/Rear/Reset] (pp.42-44).
For Video source, used to adjust the size of the image. [Normal/Wide/Custom/Keystone/Ceiling/Rear/Reset] (pp. 49-
50).
Ü Sound
Used to adjust the volume or mute the sound (p.28).
á Setting
Used to set the projector's operating configurations (pp.51-62).
à Information
Display the input source information: Input, H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp counter,
Filter counter, Power management, Key lock, PIN code lock, Simple mode, Remote control, and SERIAL NO . (p.29).
â Network
See the owner's manual of "Network Set-up and Operation".
Guide
ä
The key operation is displayed.
6

Menu Bar

Sub-Menu