Avalue Technology EPB-1001 Quick Reference Manual page 15

Mechanical Shock
Test
Drop Test
Operating
Temperature
Operating Humidity
Storage
Temperature
Transportation
Condition (in range
of °C and % R.H.)
Altitude
Expected Service
Life
Note:
Specifications are subject to change without notice.
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test Axis : X,Y and Z axis
5 Test time :10 min. each axis
6 System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Package vibration test
1. PSD: 0.026G²/Hz , 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 min. per each axis
6. IEC 60068-2-64 Test:Fh
1. Wave form：Half Sine wave
2. Acceleration Rate：10g for operation mode
3. Duration Time：11ms
4. No. of Shock：Z axis 300 times
5. Test Axis: Z axis
6. Operation mode
7. Reference IEC 60068-2-29 Testing procedures Test Eb : Bump Test
Package drop test □
1 One corner , three edges, six faces
2 ISTA 2A, IEC-60068-2-32 Test:Ed
0~40°C (32˚F ~ 104˚F), ambient w/ 0.5m/s air flow
40°C @ 95% Relative Humidity, Non-condensing
-40°C ~ 75°C (-40 ~ 167°F) (without battery pack)
-40°C ~ 75°C, 10% ~95%
5000m
830453.79 Hrs
Quick Reference Guide
EPB-1001 Quick Reference Guide 15