GeoVision GV-PBL8800 User Manual page 77

Table 37. Description of the buttons
Parameters
Record
Snapshot
Alarm to SIP
Phone
HTTP
Notification
8.4.1.2 Audio Alarm
Check the check box to enable the Audio Alarm function.
Note: Enable the Audio Mic before using Audio Alarm function.
Function Introduction
Duration: Selected the duration time of alarm. 5 s/10 s/
15 s/20 s/25 s/30 s are available.
Linkage: Save alarm recording files to SD Card or NAS or
upload the recording files via FTP.
Number: The number of snapshots, 1~5 are available.
Interval: This cannot be edited unless you choose more than 1
to Snapshot.
Linkage: Save alarm recording files to SD Card or NAS,
upload the recording files via FTP, or send alarm emails.
Support to call the SIP phone after enable the SIP function.
Support to pop up the alarm news to specified HTTP URL.
Note:
Three HTTP notifications at most can be added to the same
•
event.
HTTP Notification supports Basic & Digest authentication.
•
72