ICP DAS USA DGW-521 User Manual page 14

Hide thumbs Also See for DGW-521:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

If the driver is installed successfully, then there will be a

"Virtual COM Port" assigned by Windows. Please follow the

below steps to check it.

Click "Start" -> "Settings" -> "Control Panel" and then double

click on the "System" icon. Once the "System Properties"

screen displayed, click on " Hardware" tab and then click on the

"Device Manager" button. Double-click on Ports (COM & LPT)

item. If the device driver was correctly installed, you can find

the "ICPDAS DGW-521 USB2DALI" device listing and the

"Virtual COM Port" number that Windows has assigned to the

device is COM6, for example.

Note: If you have more than one DGW-521 connected to the

same system, then the USB ID of the modules should be set to

different. The USB ID is set by the rotary switch as shown

below.

DGW-521 User Manual, Rev. A1.0

Table of Contents